Using the Vaporizer
To treat your beehive with oxalic acid using this vaporizer,
follow the steps below:
1.First put some oxalic acid on the acid tray.
2.Insert the vaporizer into thebeehive through the
bottom hive entrance and seal all other entrances,
cracks, screens orspaces where oxalic acid vapor coutd
escapethrough.
3.0nce the hive is property sealed, connect the waporizer
to a battery and wait for all the acid to be vaporized.
4.After all the oxalic acid you added is vaporized,
disconnect the vaporizer from the battery.
5.Once that is done, you may remove the vaporizer from
the hive or leave it in place.
'6.Keep the hive sealed up for angther 10 minutes or more
to lock the oxalic acid vapor in the hive.
If you have another hive to treat, cool down the oxalic
acid tray before placing more oxalic acid on it. Repeat
the process with your next hive(s). Make sure to clean
the oxalic acid tray of this vaporizer before starting
new treatments. You should also clean it, remaving
residual oxalic acid between successive beehive
treatments.